Traice Dvr Password Reset May 2026
Disclaimer: This report is intended for educational purposes and for users who own the device or have explicit permission from the owner. Unauthorized access to a DVR is illegal.
Contact your Reseller: Since Traice is a reseller brand, the original Amazon or eBay seller has access to the master password generator. Provide them with the Device Serial Number (found on a sticker on the bottom of the DVR).
How to Reset a Traice DVR Password: A Complete Recovery Guide traice dvr password reset
- If present, note the Security Code and Date shown.
- Search online for "Traice DVR password generator" or use a generic DVR reset tool to calculate the unlock code.
Motherboard Reset Button: Open the DVR casing and look for a small push-button labeled "RESET" or "SW1" on the motherboard. With the power off, hold the button, plug the power in, and keep holding for 15–30 seconds [4, 21]. Disclaimer: This report is intended for educational purposes
- Power off the DVR and unplug the power cord.
- Unscrew the top or side cover of the DVR case.
- Locate the motherboard (the large circuit board).
- Look for a small, blue, white, or yellow jumper cap (a tiny plastic piece covering two metal pins). It is usually labeled "RESET", "J1", "CLEAR", or "CMOS".
5) Reset via manufacturer software or mobile app
- Some Traice DVRs pair with a desktop client or mobile app that supports password recovery when the device is online and linked to an account.
- Open the vendor app, locate the device, and use the account/device password recovery options. You may need device serial number or verification code from the DVR OSD.
Shorting Jumper Pins: If there is no button, look for two pins labeled "J1", "RESET", or "CLR". Use a screwdriver or tweezers to bridge (short) these pins while powering on the device for roughly 15 seconds. Contact your Reseller: Since Traice is a reseller
