Telefon
Telegram
WhatsApp
İnstagram

Zeus Z3 Digital Lock Manual __top__ • Latest

Zeus Z3 Digital Lock is a versatile smart security solution commonly utilized for both main doors and gates. As part of the Zeus Pro series, it features advanced connectivity, allowing for remote management via smartphone applications. Key Features Multiple Access Methods

(also known as the Zeus Z-3 Duo Pro ) is a popular smart lock in regions like Singapore, often integrated with a mobile app for remote management 1. Programming Basic Access Most Zeus digital locks use a Registration (SET) Button Zeus Z3 Digital Lock Manual

  1. Remove Old Lock: Remove your existing deadbolt. Ensure the crossbore hole (the large face hole) is 54mm (2.1 inches) in diameter.
  2. Install Latch: Insert the latch into the edge bore, ensuring the "UP" marking faces the sky. Secure it with the two screws. Crucial step: Make sure the latch is fully retracted (not sticking out) when the key is vertical.
  3. Install Strike Plate: Attach the strike plate to the door frame, ensuring the hole aligns perfectly with the latch.
  4. Place Exterior Panel: Feed the cable through the top hole of the latch. Push the exterior panel flat against the door.
  5. Mount Interior Plate: Attach the mounting plate (backplate) over the cable, sliding the spindle through the center. Secure it with the three screws provided.
  6. Connect Cable: Plug the ribbon cable into the port on the rear panel. Do not pinch the wires.
  7. Attach Interior Panel: Slide the rear panel onto the mounting plate. Tighten the two screws inside the battery compartment.
  8. Battery Power: Insert 4 AA batteries (Alkaline only—do not use rechargeable). You should hear a long beep. The keypad will flash.

2. Package Contents