Zastone | D9000 Programming Software

CHIRP Status: As of current data, the Zastone D9000 is not natively supported in the standard CHIRP builds. It is recommended to use the official CPS or RT Systems. 🔌 Connection & Hardware Requirements zastone d9000 programming software

• Go to the Crossband tab.
• Set VHF to UHF (e.g., Listen on 146.520, Transmit on 446.000) or reverse.
• Important: You must check the "Enable" box and set a "Delay Time" (ms). Without delay, the relay flutters.

• Progress bar: You should see a progress bar fill up. If it says "Failed," check your cable connection and COM port setting.

While the D9000 features a large, readable twin-display, programming it via the software (CPS) offers several advantages: The Zastone D9000 Go to product viewer dialog

The software allows you to:

1. Go to the Zastone website and navigate to the "Support" or "Downloads" section.
2. Search for the D9000 programming software and click on the download link.
3. Save the software to your computer and run the installation file.
4. Follow the on-screen instructions to complete the installation process.

Overview

The Zastone D9000 is a vehicle-mounted (mobile) two-way radio. Its programming software (CPS) lets you configure channels, frequencies, signaling (CTCSS/DCS), power levels, channel names, tones, scan lists, squelch, and other radio parameters from a Windows PC via a USB programming cable. Go to the Crossband tab

💡 Pro Tip: Always perform a "Read from Radio" before your first programming session. This creates a backup of your factory settings in case you need to restore them later. If you'd like, I can help you: Find the exact pinout diagram for a DIY cable. Locate the latest firmware update instructions. Walk through manual programming for a single channel. D9000 Car Walkie Talkie programming software D9000 Car Walkie Talkie programming software. Zastone Mobiles Radio Programming Software - RT Systems