The Yeestor (SiliconGo) YS9082HP MPTool is a specialized production utility used to repair, reprogram, or restore SSDs that utilize the YS9082HP controller. This controller is common in budget SATA SSDs from brands like Netac, Goldenfire, Digma, and various generic models from AliExpress. When to Use This Tool You should use this tool if your SSD: Is not recognized by your operating system or BIOS. Reports the wrong capacity (e.g., 0MB or 1GB).
: Physically short the ROM pins on the SSD and connect it via a SATA-to-USB adapter Flash Firmware ys9082hp mptool
Enumerate connected devices
The YS9082HP MP Tool (Mass Production Tool) is a firmware flashing and low-level formatting utility designed specifically for Solid-State Drives (SSDs) using the Yeestor YS9082HP controller. Yeestor is a Chinese controller manufacturer whose products are widely found in budget and mid-range SSDs from brands like KingSpec, Goldenfir, Netac, FOX Spirit, and many generic "no-name" drives. The Yeestor (SiliconGo) YS9082HP MPTool is a specialized
to detect the drive. If successful, it should appear in one of the ports as being in "Rom Mode". Parameter Setup : Navigate to the tab. You may need to click Edit Config (typically the password field is left empty). Auto-Detection : Many versions feature an Reports the wrong capacity (e
In many cases, a corrupted SSD won't be seen by the software. You may need to put the drive into ROM Mode (Safe Mode). Open the SSD casing. Locate the two "ROM" solder pads on the PCB.