Tvs Rp 3160 Star Driver Installation Upd _verified_ May 2026

Setting up the TVS RP 3160 Star (often referred to as the Gold model) is a straightforward process that involves downloading the correct software from the official portal and configuring your connection port. 1. Download the Latest Driver

If you already have the driver installed but need an update:

Click Browse and navigate to the folder where you extracted the TVS_RP_3160_Star driver.

Select the *.inf file (usually tvsrp3160.inf).

Click OK.

Download the TVS RP 3160 Firmware flasher (usually a .exe or .bin file).
Connect via USB or Serial (Ethernet usually fails for firmware).
Run the flashing tool. Warning: Do not interrupt power during this 2-minute process, or you will brick the printer.

Go to Printer Properties > Preferences > Advanced.
Set Paper Size to "Continuous Feed Letter" or "Custom Size" (Width: 8.5 inches / Length: 11 inches).
For 80-column printing, ensure "Epson FX-850" emulation is selected in the printer's hardware menu (press the 'LF' button on the printer itself for 3 seconds to enter emulation mode).

: During setup, you may be asked to select the printer model ( RP 3160 Star ) and the interface. Ensure you select the USB printer port (e.g., USB001) if connected via USB. Finish Setup : Once the installation is complete, click . It is highly recommended to restart your computer to finalize the integration. Step 3: Verification Check Status Control Panel > Devices and Printers . You should see the RP 3160 Gold listed as a connected device. Test Print : Right-click the printer icon, select Printer Properties , and click Print Test Page to confirm the connection is working. Troubleshooting Tips Connection Failed