Tm8115 Programming Software | Tait
Beyond the Slider: A Deep Dive into Tait TM8115 Programming Software
In the world of Land Mobile Radio (LMR), the hardware often gets all the glory. We fawn over IP ratings, channel capacities, and RF output power. But for those of us who actually manage a fleet, we know the truth: the radio is only as good as the software that configures it.
: If you are tech-savvy, you can build a cable using a genuine FTDI board. Be warned: Tait logic levels are inverted, so you must use the FT_PROG utility tait tm8115 programming software
Most modern jurisdictions require 12.5 kHz narrowband spacing. The TM8115 software allows you to toggle this per channel. Selecting the wrong bandwidth can result in distorted audio or "splatter" onto adjacent channels. Scanning Lists Beyond the Slider: A Deep Dive into Tait
- Priority scanning
- Dual-tone multi-frequency (DTMF) signalling
- Radio check and radio disable
- Telemetry and remote monitoring
B. Conventional Channels (Analog)
- Channel Name: e.g., “Dispatch 1”
- Receive Frequency (MHz): e.g., 155.2500
- Transmit Frequency: Often same as RX for simplex, or different for repeater operation.
- CTCSS/DCS Tones: For analog squelch control.
- Bandwidth: 12.5 kHz (narrowband) or 25 kHz (wideband – legal only in specific applications).