Strands S68 Drill Press Manual Online

The Strands S68, produced by Machinery Scandinavia AB, is a durable Swedish gear-head drill press featuring 8 spindle speeds (100–2900 RPM) and a 1.1 kW motor suited for industrial metalworking. The unit includes a 360-degree rotating head, 140mm quill travel, and requires specific maintenance for its helical gears and tapered chuck. View the official spare parts list and manual from Machinery Scandinavia AB. Strands S68 Geared Head Drill - Newmac Equipment

1. Free Digital Repositories

VintageMachinery.org: The premier source for scanned industrial manuals. Search "Strands" in the publication reprints section.
International Library of Technology: Often includes generic service manuals for Swedish-made presses (Strands is a Swedish brand).

Drilling Capacity | : 20mm | suitable for both small and larger diameter holes in steel, aluminium and other materials. Spare parts & service - Machinery Scandinavia Strands S68 Drill Press Manual

Zero Play: A common failure point in older drills is quill wear (wobble). The S68 utilizes adjustable gibs and precision bearings that, even after 40 years of use, can often hold tolerances within a few thousandths of an inch.
Longitudinal Keying: The spindle is robustly keyed, preventing the quill from rotating under load—a critical feature when using large diameter bits or hole saws.

4.2 Assembly Steps

Base – Place on level concrete floor; bolt down if needed.
Column – Insert into base, tighten locking bolts.
Table bracket – Slide onto column; install rack and pinion handle.
Table – Mount on bracket, level with a spirit level.
Head unit – Lift (use hoist for heavy models); slide onto column top; secure with set screws.
Belt guard – Install per manual diagrams.
Feed handles – Screw into hub on the right side.

The Benefit: Unlike lighter, modern presses that tend to "walk" or chatter when drilling through thick steel, the sheer mass of the Strands S68 ensures a dead-calm drilling operation. It offers the rigidity usually reserved for industrial milling machines.

model is designed for durability and versatility in industrial environments: The Strands S68, produced by Machinery Scandinavia AB,