To upgrade the software on your Satlink WS-6906 satellite finder, you will need a PC, an RS-232 serial cable, and the SatlinkTools (or Satlink Updater) utility Requirements
Software: SatlinkTools or the dedicated WS-6906 Updater utility. Firmware File : A valid .bin firmware file specific to the . Upgrade Procedure 1. Preparation satlink ws-6906 software upgrade
The upgrade process is generally performed through a PC connection rather than directly on the device menu. To upgrade the software on your Satlink WS-6906
. If the connection is successful, the computer should display a "Succeed connecting COM1" (or similar) message Load the Software: Load Software button in the tool. Select the downloaded firmware file from your folders. Execute the Update: to begin. The process typically takes about 2 minutes. Device will auto-restart or show "Upgrade successful
RS-232 Cable: Typically a 3.5mm jack to DB9 cable, often included with the device.
"Upgrade successful. Reboot."Menu → System → Information to verify new firmware version.Cable: You will need a serial RS-232 to USB cable (or a native serial cable) to connect the meter to a PC.