Files ((link)) - Samsung N8000 Firmware 4

Samsung Galaxy Note 10.1 (GT-N8000) is a legacy device, and finding the "4-file" repair firmware (comprised of BL, AP, CP, and CSC

If you are using the regular CSC file, back up your contacts and messages as all data will be deleted. Flashing Instructions Enter Download Mode: Power off the device. Press and hold Power + Volume Down simultaneously. When a warning screen appears, press to confirm. Connect to PC: samsung n8000 firmware 4 files

Required Tools

To flash this firmware, you will need:

6. Completion

• The flashing process will begin. A progress bar will appear on both the tablet screen and the Odin software.
• Once finished, Odin will display a green box saying "PASS!" and the device will automatically reboot.
• Disconnect the cable.

• BL_N8000XXUDNE4_...tar.md5 → BL
• AP_N8000XXUDNE4_...tar.md5 → AP
• CP_N8000XXUDNE1_...tar.md5 → CP
• CSC_OXA_N8000OXADNE4_...tar.md5 → CSC

Backup: Flashing 4 files (specifically with the CSC file) will erase all data on your device. Flashing Procedure Samsung Galaxy Note 10

, you will need the Odin tool. Unlike a single-file flash, a 4-file firmware performs a clean install by re-partitioning and wiping the device data. Preparation Backup Data: This process will erase all internal storage. Drivers: Install Samsung USB Drivers on your PC. Charge: Ensure your tablet has at least 50% battery. The flashing process will begin

Would you like a step-by-step Odin flashing guide for this 4-file firmware?