Redsail Cutting Plotter Usb Driver Install Verified -
Installing the USB driver for a Redsail Cutting Plotter (such as the RS720C or RS1360C) is a multi-step process that involves installing the correct Virtual COM Port (VCP) driver and then mapping that port in your design software. 1. Identify and Download the Driver
Power On: Ensure the plotter is powered on and connected to your PC via the USB cable before starting the installation. redsail cutting plotter usb driver install
Set the Baud Rate (Sequential speed). For most Redsail models, the standard is 9600 or 38400. Ensure the Flow Control is set to Hardware or Xon/Xoff. Troubleshooting Common Issues "Device Not Recognized" Installing the USB driver for a Redsail Cutting
The USB cable was plugged in. The power light was a steady green. But when she opened Sure Cuts A Lot, the "Device" dropdown menu showed only one option: Not Connected. Run RedSail_Setup_v2
Chapter 3: The Installation Process
Here is the step-by-step execution of the install.
She clicked. Downloaded. Extracted the folder to her desktop. Inside: a Setup.exe file, a folder labeled x64, and a cryptic ReadMe.txt.
- Run
RedSail_Setup_v2.1.exe(or newer) - During install, choose USB (Virtual COM) not LPT.
- Ignore any "not signed" warnings.