Subject: Technical Report on Quad-Core T3 P1 Update Package
Used if device is fully bricked:
Step 3: Installation
Conclusion
| Error Code | Meaning | Solution |
| :--- | :--- | :--- |
| [0x10105002] | USB cable not detected | Use a shorter USB 2.0 cable. Avoid USB 3.0 ports. |
| [0x32030201] | Partition mismatch | The T3 P1 image is for a different NAND chip (e.g., Samsung vs SanDisk). Find a "Burn" package specifically for your NAND. |
| Romcode/Switch status/Identify/Error result | Reset button not pressed long enough | Hold the reset button for 15 seconds after plugging into PC. |
| Uboot/Get result/DiskInitial error | eMMC is fried | This is hardware failure. No software update will fix it. |
Automatic Reboot: Once finished, the device will reboot itself into the fresh Android environment. ⚠️ Troubleshooting Common Update Failures Root Cause "No update file detected" File placed inside a folder or incorrect format.
The update was successfully downloaded and installed, with the following outcomes: