Mpall V5.13.0c [work] - Phison

Phison MPALL V5.13.0c is a "Mass Production" tool designed for advanced software-level repair and firmware flashing of USB flash drives equipped with Phison controllers. This specific version is a newer iteration used primarily to recover "dead" drives, remove write protection, or fix "No Media" errors. Key Features and Compatibility

FAQs

The Critical Requirement: Matching Firmware Phison Mpall V5.13.0c

  1. The drive is RAW – Windows asks to format the disk, but formatting fails.
  2. 0 bytes available – The drive appears in Disk Management but shows 0 bytes total.
  3. The capacity is wrong – A 32GB drive shows as 8MB or 0GB.
  4. Write-protected error – You cannot copy, delete, or format the drive even with registry edits.
  5. The drive is not recognized – It appears as "Unknown Device" or "Phison USB Device" without a drive letter.
  6. After a failed firmware update – A previous flashing attempt left the controller in a dead state.
  • Right-click → Run as Administrator all executables later.

    • Benefits for Storage Device Manufacturers Phison MPALL V5

    Step 5: Final Steps

    1. Close MPall.
    2. Unplug the USB drive – wait 10 seconds.
    3. Replug the drive. Windows should prompt you to initialize or open the drive.
    4. Perform a quick format via Windows Disk Management (just to set a fresh file system).