Kincaid Radio Controlled Clock Instruction Manual Work May 2026

Kincaid Radio-Controlled Clock — Instruction Manual

Package Contents

• Kincaid Radio-Controlled Clock
• AA battery (installed/test)
• Quick start guide (this manual)

Insert Battery: Use one fresh AA alkaline battery. Once inserted, the hands will usually spin to a preset position (often 12:00, 4:00, or 8:00) and stop while searching for the signal.

Problem: Clock shows wrong hour (or off by exactly 1 hour)

| Possible Cause | Solution | |---|---| | DST setting incorrect | Ensure DST switch is ON if you observe DST | | Time zone switch bumped | Reset time zone and force a manual sync | | Clock received German (DCF77) or UK (MSF) signal | This is rare. Reset by removing battery for 30 minutes, then reinstall and set to US mode (if multi-band model). | kincaid radio controlled clock instruction manual

• Most Kincaid clocks have a DST (Daylight Saving Time) switch on the back. If the clock is one hour behind, switch this to "ON". If one hour ahead, switch to "OFF".
• Note: If your area does not observe DST (like parts of Arizona), ensure this switch is OFF.

Key topics to include:

Part 2: The Radio Synchronization Process

Once the battery is installed and the hands are set roughly to the correct time, your Kincaid clock will begin searching for the WWVB signal. Insert Battery : Use one fresh AA alkaline battery

: If the clock is not responding, remove the battery, press the manual set button 15–20 times to drain any remaining power, then reinsert the battery and try the setup again. remove the battery

Kincaid Radio Controlled Clock

Instruction Manual

Model: [Insert Model Number] Power: 2 x AA / AAA Batteries (not included) / AC Adapter (select models)

Signal Reception Tips