Ki 256 Installation Manual -

The Complete Guide to the KI 256 Installation Manual: Procedures, Pinouts, and Calibration

Published by: Avionics Technical Resources
Reading Time: ~12 minutes

3. Mechanical Installation: Step-by-Step

Step 1: Panel Cutout & Mounting Tray

The KI 256 requires a standard 3-1/8 inch (79.4 mm) round cutout. The mounting tray (usually P/N 070-01048-0002) must be aligned so the indicator’s face is perpendicular to the aircraft’s longitudinal axis. Use a level to set the tray within ±0.5° of the aircraft’s level flight attitude. ki 256 installation manual

Because the KI 256 is an integral part of STC-approved (Supplemental Type Certificate) systems like the KFC-200, it cannot be easily swapped for other instruments without comprehensive system changes, such as a Garmin G600 retrofit. Physical Characteristics: The Complete Guide to the KI 256 Installation

Once installed, the system requires precise calibration to ensure the autopilot and manual flight director cues are synchronized. Phillips screwdriver Drill with bits for mounting surface

Required tools

Step 5: Final Checks

5.2 Calibration (Pitch & Roll)

KI 256 Installation Steps