How To Unbrick Poco M5s -

Disclaimer: Bricking a device carries a risk of permanent damage (hard brick). This guide is for the POCO M5s (codename: stone) only. Flashing files intended for a different model will permanently damage your phone. Proceed at your own risk.

Step 1: Identify the Type of Brick

You cannot fix a problem until you know what you are dealing with. Connect your Poco M5s to your PC via USB and observe the behavior. how to unbrick poco m5s

• SP Flash Tool (Smartphone Flash Tool) v5.20+ for Windows.
• MTK USB Drivers (MediaTek Preloader VCOM drivers).
• Auth Bypass tool (for newer security).
• Stock ROM in SP Flash Tool format (scatter file).

(ensure it matches your region, e.g., Global, India) and extract it until you see a folder with a flash_all.bat Prepare PC Xiaomi USB Drivers and the Mi Flash Tool. Fastboot Mode : Turn off your phone, then hold Power + Volume Down until the Fastboot logo appears. Connect it to your PC. Open Mi Flash Tool, click , and point to the extracted ROM folder. to see your device. "clean all" Disclaimer: Bricking a device carries a risk of

Important checks before proceeding

• Ensure battery isn't completely dead – leave on charger 1 hour.
• Try different USB cable/port.
• Check if PC detects any device (Device Manager).

Part 7: Post-Unbrick Checklist

Once your Poco M5s boots again:

Important Check: Ensure the checkbox next to Preloader is checked. If the preloader is corrupted, you cannot revive the phone, so it must be flashed.