Hamachi Relayed Tunnel To Direct Tunnel Fix !link! -

A "Relayed Tunnel" (blue dot) in Hamachi indicates that a direct peer-to-peer connection could not be established, forcing traffic through LogMeIn's relay servers, which significantly increases latency

1. Hamachi UI: Next to the peer’s name, look for Direct tunnel.
2. Speed Test (Internal): Transfer a 100MB file. A Relay tunnel will max out at ~300KB/s. A Direct tunnel will use your full upload bandwidth (e.g., 10MB/s+).
3. Latency Check:
4. Check the Hamachi Log:

   A relayed tunnel (indicated by a blue dot) occurs when Hamachi cannot establish a direct connection between peers, usually due to firewall or router restrictions. This often leads to higher latency and slower speeds compared to a direct tunnel (green dot). 1. Configure Windows Firewall Exceptions hamachi relayed tunnel to direct tunnel fix

   • ZeroTier (more reliable direct tunnels)
   • Tailscale (uses WireGuard + DERP relay fallback)
   • Radmin VPN (similar to Hamachi but often gets direct links)

   The holy grail of Hamachi optimization is achieving a "Direct Tunnel." This article provides a comprehensive, step-by-step fix to convert your Relayed tunnels into Direct tunnels, dramatically improving latency and throughput. A "Relayed Tunnel" (blue dot) in Hamachi indicates

   Under Peer Connections, set "UDP Address" to your chosen UDP port. Set "TCP Address" to your chosen TCP port. Restart: Fully close and restart Hamachi. 2. Disable Universal Plug and Play (UPnP) Hamachi UI: Next to the peer’s name, look

   Check Firewall and Antivirus Settings

   1. Open your firewall or antivirus software.
   2. Look for settings related to Hamachi (e.g., "Allow Hamachi" or "Exception").
   3. Enable or add Hamachi to the exception list.