Eberle Instat 6 User Manual English [Cross-Platform]

Complete Guide: Eberle Instat 6 User Manual (English)

Last Updated: May 2026
Product Focus: Eberle Instat 6 Electronic Room Thermostat

Let me know how I can assist further! 😊 eberle instat 6 user manual english

: Install approximately 1.5m above the floor on an internal wall, away from draughts, direct sunlight, or heat sources. Wiring Precautions Complete Guide: Eberle Instat 6 User Manual (English)

Mounting: Designed for wall mounting in standard flush-mounted boxes or surface mounting.  +Instat - Eberle Controls - PDF Catalogs | Documentation Turn off power at the circuit breaker

1. Turn off power at the circuit breaker.
2. Gently pry off the front cover (no screws – clips on bottom edge).
3. Locate the coin cell near the display PCB.
4. Remove old battery, wait 1 minute (to discharge capacitors).
5. Insert new CR2032 (+ side up).
6. Reassemble and restore power. Reset time and date as per Section 4.

9. Technical Data

• Power Supply: 230V AC, 50/60 Hz.
• Switching Capacity: typically 10A (2300W) resistive load.
• Temperature Range: 5°C to 30°C.
• Hysteresis (Switching Differential): ±0.5 K (approx).
• Protection Class: IP 20.

Clear Interface: Features a large LCD display showing current room temperature and time, with an intuitive 4-button navigation system. Performance Review Thermostats with digital clock - INSTAT 6 - Eliwell France

1. Setting Temperature Values: Users can set temperature values using the device's keypad or through digital communication protocols.
2. Configuring Parameters: Users can configure device parameters, including timer functions, alarm handling, and communication protocols.
3. Monitoring Device Status: Users can monitor device status, including temperature values, device status, and alarm messages.

The INSTAT 6 series includes several variants with distinct characteristics: