Download Spflash Tool Version 5.2404.00.000 ((exclusive)) ⇒

SP Flash Tool version 5.2404.00.000 is a specialized utility designed for managing firmware on devices powered by MediaTek (MTK) processors. This specific version, released in late 2024, is optimized for hardware and CPUs dating back to 2021. Overview and Primary Functions

Best Practices and Warnings

• Never disconnect the USB cable during a preloader write – it will hard-brick the device.
• Always back up the current firmware before flashing using the Read Back tab.
• Battery charge: Keep phone battery above 60% to avoid voltage drops.
• Antivirus: Some AVs flag flash_tool.exe as a risk (false positive due to driver access). Add an exclusion.
• VM Usage: Do not run SP Flash Tool inside a Virtual Machine – USB timing issues cause 90% failure.

) included with your device's firmware that acts as a map for the tool. Download Agent (DA) MTK_AllInOne_DA.bin Download SPFlash Tool version 5.2404.00.000

Compatibility: This specific version (v5.x) is optimized for older 2021-era CPUs. SP Flash Tool version 5

If you are looking to flash, update, or unbrick a MediaTek (MTK) powered Android device, having the right version of the Smart Phone Flash Tool (SPFT) is critical. Version 5.2404.00.000 Never disconnect the USB cable during a preloader

Important Note for version 5.2404.00.000:

If you see a red progress bar followed by STATUS_EXT_RAM_EXCEPTION, go to Options → Download → Increase the Baud Rate to 921600 and check DA DLL checksum.

: These must be installed on your PC for the tool to recognize the device in "Preloader" or "DA" mode. Scatter File : A text file (usually named MTxxxx_Android_scatter.txt