Adjustment Program Epson — Xp 313 Top ((install))

Epson XP-313 Adjustment Program (also known as a "Resetter") is a specialized utility tool primarily used to fix the "Service Required" error by resetting the printer's waste ink pad counter

How to use it (brief steps)

  1. Connect printer via USB – not wireless.
  2. Turn printer on (error message will appear – ignore).
  3. Run the Adjustment Program as Administrator (right-click).
  4. Select “Waste ink pad counter” or “Initial setting”.
  5. Click “Check” – it will show counters 0-100%.
  6. Click “Initialization” to reset.
  7. Do not click other options like EEPROM reset or Head ID unless you know what you’re doing.

Step 1: Put Printer into Service Mode

The adjustment program cannot communicate with the printer in normal mode. You must enter Service/Factory Mode: adjustment program epson xp 313 top

: Allows for EEPROM data copying, Top Margin adjustment, Bi-D (bi-directional) adjustment, and USB ID input. Key Technical Specifications Epson XP-313 Adjustment Program (also known as a

Cleaning Cycles: Performs deep print head cleaning (weak, middle, or strong levels). How to Use the Program Connect printer via USB – not wireless

⚠️ Important Warning

  • Using the Adjustment Program voids your warranty (if still valid).
  • Resetting the counter without actually replacing/cleaning the waste ink pads will cause ink to leak inside or outside the printer.
  • Download from unofficial sources carries virus risks – use a trusted, offline PC (Windows 7/10 recommended).

Finalization: Turn the printer off and then back on when prompted to complete the reset. Important Considerations