Adjustment Program Epson Sx 125 !new! [Exclusive]

The Epson Adjustment Program (often called "AdjProg" or "Resetter") for the Epson Stylus SX125

Cheaper alternative:

Instead of resetting, buy a $15 external waste ink tank mod (drill hole in case, route tube to external bottle). Then you reset infinitely without opening the printer again. Search "Epson SX125 waste ink mod". Adjustment Program Epson Sx 125

Waste Ink Pad Counter Reset: Resets the main and platen pad counters. The Epson Adjustment Program (often called "AdjProg" or

Two options:

  1. Cheap but messy: Wear gloves. Remove the sponge, squeeze it out under running water until water runs clear. Dry completely (24h). Reinsert. (Only works 2–3 times.)
  2. Proper: Buy a 3rd-party waste pad kit (~$5–10) or cut a 5mm thick felt pad to size.

Precautions and notes

| Error Message | Likely Cause | Solution | | :--- | :--- | :--- | | "Communication Error" | USB connection issue or wrong port | Go to "Configuration" -> "USB Port" -> Auto Selection. Reinstall the USB driver. | | "Printer Model Mismatch" | Wrong software version | Download a dedicated SX125 program. Do not use generic "Stylus SX100" tools. | | "Counter Reset Failed" | Printer not in service mode | Repeat the button sequence exactly. Hold buttons until printer makes a noise. | | "Checksum Error" | Corrupted EEPROM data | Run the "Initialization of EEPROM" option before the waste ink reset. | | Lights resume blinking after 1 day | Physical waste pad full | The reset worked, but the ink overflow sensor (if present) is triggered. Replace or clean the physical pads. | Cheap but messy: Wear gloves

Step 2 – Run the program

  1. Disable your antivirus temporarily (false positives are common; the tool modifies EEPROM data).
  2. Right-click AdjProg.exe → Run as Administrator.
  3. Set language to English (if prompted).

This article will dive deep into what the adjustment program is, why you need it, how it works, the risks involved, and a step-by-step guide to using it safely.